Lundmark 5 Gal. Matchless Urethane Fortified Acrylic Floor Finish

This high-performance finish has remarkable adhesive qualities, blackmark, abrasion, and scuff-resistance. It's scrubbable, buffable, and wears extremely well. Ideal for use in traditional as well as high-speed and ultra high-speed programs. Use it on vinyl asbestos, asphalt, and rubber tile, linoleum, terrazzo, aggregate, quarry tile, brick, concrete, sealed wood, and parquet. Directions : Note: Apply with a prewashed, good quality string mop or wax applicator. Be sure mop has not been contaminated with cleaners or strippers. Initial Application: 1. Strip all old wax/finish with a good quality product, and rinse floor thoroughly. Allow floor to dry completely. 2. Apply two (2) coats of finish allowing 30-40 minutes drying time between applications. When using as a foundation for high-speed and ultra high-speed programs, apply additional coats to create a long-lasting base. Maintenance: 1. Sweep and/or dust mop daily. Damp mop daily or as needed. 2. For high-speed and ultra high-speed maintenance programs, mop or scrub weekly (or more often) using the renovator product, allow to dry to a haze then burnish to a high-shine. Spray Buffing: Use a prepared spray buff compound for efficient, economical, spectacular results. Stripping: Use a good quality alkaline or ammoniated stripper. 1 gallon of Matchless will cover approximately 2500 sq. ft. with 1 coat.

Features:

• Blackmark, abrasion, and scuff-resistance
• Scrubbable and buffable
• 9000 To 10000 Sq. Ft.
• 5 Gal.